Products






  Home > Mini Racing Quads/Drones > FPV Accessories >

OSD Image Overlay System with GPS
DragonRC-Iflightrc OSD Image Overlay System with GPS


 
Our Price: $68.00

Stock Status:In Stock

Product Code: IFRC-TL300L
Qty:

Description
 
iFlight OSD Image Overlay System With GPS TL300L is compatible with iFlight Mini 250mm Carbon Fiber Quadcopter and other 250/300 mini racing multicopters. It comes with optional English and Chinese interfaces, each parameter can be set on the monitor. The OSD comes with the barometer sensor and GPS module, which make the altitude and location more precisely. iFlight mini 250/300 frame has hole to install the OSD, it will be easy to install the OSD on those frames.

iFlight OSD iamge overlay system has the following functions: battery voltage/ flight time/flight speed/ flight altitude/home direction/distance from home/accumulative flight distance/elevator rate/longitude and latitude /setellite quantity/azimuth and etc.



iFlight OSD video overlay system Button Functions:

After start, short press it to save the location of the home (the position where the mutlicopter take off). Long press it will enter the “Setup Menu”. Press it for two times can switch the video format. The video format can change in Setup Menu.
In Setup Menu, short press is to choose the settings, long press is to save or confirm.
Test the real voltage of the battery by multimeter, enter battery voltage calibration, vand set it to the voltage you tested, and then quit. Calibrate the voltage could only use the 3S 11.1V.


iFlight OSD video overlay system Product Parameters:

- English/Chinese interface
- Dual voltage detection range: 0 ~ 16.8V / 0 ~ 30V
- Video output: NTSC or PAL (OSD can be set)
- Operating voltage: 7 ~ 16.8V
- Current: 100 mA (12V)
- OSD module: 46 × 26 × 8mm
- Weight: 20 g (with GPS module)

iFlight OSD video overlay system Package included:

- iFlight OSD video overlay system x 1
- GPS x 1
- Manual x 1
- Cable x 1

Features

- English/Chinese interface
- Dual voltage detection range: 0 ~ 16.8V / 0 ~ 30V
- Video output: NTSC or PAL (OSD can be set)
- Operating voltage: 7 ~ 16.8V
- Current: 100 mA (12V)
- OSD module: 46 × 26 × 8mm
- Weight: 20 g (with GPS module)

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Mini Racing Quads/Drones > FPV Accessories