Products






  Home > Receivers/Others > Radiolink >

RadioLink R4EH-G 2.4Ghz 4 Channel Car Receiver with Steering Gyro and ABS Braking
DragonRC RadioLink R4EH-G 2.4Ghz 4 Channel Car Receiver with Steering Gyro and ABS Braking


 


Our Price: $28.80

Stock Status:(Out of Stock)

Product Code: RL-R4EHG
Qty:

Description
 

R4EH-G, Gyro integrated for steering and ABS braking

Specification

1. Channel: 4CH

2. Modulation mode: FHSS

3. Max input voltage: 10V

4. Current: 25-30 mA (voltage 5V)

5. Size: L×W×H=35×20×13

Features:

1. 2.4G 4channel receiver.

2.Gyro integrated for steering and ABS braking

3.Nice anti-interference.

4.Top response speed, 12ms only. Much better than the average 20ms.

Gyro Function:

Integrated Gyro, is used to assure the stability of cars when turning
and Anti Braking System to make sure your brakes are never locked.
Keep on running straight even when the cars have some mechanical problem. If the steering wheel is released or returned to center, it can hold the vehicle in a straight line during aggressive acceleration and braking.
Just like the real full size modern cars.

Features

Set up INSTRUCTION

Gyro function can be enabled or disabled!

A. Gyro enabled

Gyro preset disabled, and it enters post indication status. There are two indicators on the receiver. The green one shows the receiver status and the red one is for gyro. When the Red led turns on, the gyro is enabled , and the Red led turns off, gyro disabled.

B. Gyro enabled forward

Cars can be driven forward and backward, gyro is enabled forward or backward correspondingly. Like the EP cars, different connection will make different direction, the gyro is ensured to be enable forward.

C. Gyro reverse

If the Gyro action on the wheels is reversed, follow the step 4.

1. Enable gyro

Press binding key three time (interval less than 1 second), the red LED will flash three time, indicating whether gyro is enabled.

2. Gyro sensitivity

Gyro sensitivity can be adjusted by channel three (factory set VR function), turning the VR switch clockwise to raise sensitivity and anti-clockwise to decrease.

3. Gyro forward

When the gyro is enabled, pull the throttle trigger and then release (make sure the car stops running), turn the car right or left without changing steering wheel, if the servo will not follow with, it shows gyro is set backward. Press the binding switch one time in less than 1 second, the LED flashes red once, gyro is changed to act forward.

4. Gyro direction is reverse

Set the gyro forward, turn the car right or left to see whether gyro functions. The wheel will turn left when the car is turned right and the wheel turns right when the car is turned left. If the gyro acts counter, press the binding switch two time, the LED flashes two time Red, the gyro reverse is corrected.


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Receivers/Others > Radiolink