Wingspan: 65inch/1659mm

Length: 59.1inch/1502mm

Wing Area: 50.5sq.dm

Flying weight: 3100g

Power: Nitro 60-90, 90-110 , Gasoline 20CC, Electric 5065

RC system: 4 - 5 channels, 5 servos

Construction: balsa and plywood

The SLICK-540 is approved for all aerobatic manoeuvres.
Before operating the Slick 540 the pilot must be checked out by an authorized
representative of the Slick Aircraft Company.
During take-off, flight and landing the aircraft responds as any typical aerobatic approved
tail-wheel aircraft. The aircraft responds normally during stalling and spinning.
The aircraft is designed to resist very high g- forces. It has to be recognised that the full
use of this capacity may exceed the physical loading capability of the pilot, as this
depends on the individual’s constitution. Special care has therefore to be taken during
flights with high g-forces.
The aircraft is designed to be operated from paved surfaces only.