Products






  Home > Turbines > Telemetry >

VSpeak Modell Onboard Compressor Auto Air Fill for Air Retracts
VSpeak Modell - DragonRC Onboard Compressor Auto Air Fill for Air Retracts


 
Alternative Views:



Our Price: $346.00

Stock Status:(Out of Stock)

Product Code: VS-OBCAR
Qty:

Description
 

There are several operating modes for Auto-Air-fill:

    • Autonomous Automatic mode (remote control independent)

    • Automatic mode Servo port (requires a servo output to which a 3-position switch has been programmed)

    • Automatic mode Telemetry port (only with Jeti and PowerBox core: Telemetry data are transferred)

The compressor can be powered by a 3S Lipo battery.

  • In order to save weight, the compressor can also be supplied with power from the "larger" turbine battery in turbine models. It has an Opto coupler to isolate and prevent any interference.

    VSpeak Auto-Air-fill is an onboard compressor for pneumatic chassis mechanics, brakes etc.
    The pressure range can be adjusted as well as some other parameters.
    Once set, the desired pressure range is regulated fully automatically.
    A previously required pressure reservoir can be significantly reduced - or it can be
    dispensed with entirely.
    When air is compressed, heat is generated, with high pressures and long running times of the
    onboard compressor correspondingly a lot of heat. We therefore recommend using a Teflon
    hose (outer diameter 4mm) as the direct compressed air connection.
    The pressure sensor of the onboard compressor is calibrated upon delivery - but can also be
    recalibrated at any time.

Onboard Compressor Auto Air Fill
F16 with Onboard Compressor

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Turbines > Telemetry
Aircrafts > Airplane FC/Gyro/Telemetry
Accessories > Telemetry
Accessories > Electronics
Turbines > Accessories