RCCSKJ 2122 3 in 1UBEC/CDI switch
Product Code: rccskj-2122
Our Price: $26.00
Description
RCCSKJ 2122 3 in 1UBEC CDI switch
Description: 3-in-1 UBEC/CDI Kill Switch w/ Dual LED color Voltage Alarm
This 3-in-1 UBEC/CDI Kill Switch for Gas RC planes, allows you to
safely and remotely kill your electronic ignition. It is Fiber Optically
Coupled providing complete isolation between the ignition system and
the radio system so there is NO interference. Simply plug this device
into a spare receiver channel to give the pilot the ability to safely
kill the engine anytime on the ground or in the air. This is a must
have safety device for any gas powered plane (most fields require a kill
switch for gas planes). The 5 amp Universal Battery Elimination Circuit
(UBEC) is a 'switch mode' DC regulator that takes the high voltage
(6-13 volts) of the main battery pack and converts it to a consistent
and safe 5.2 volts output to the CDI. This device also offers dual color
LED alarm feature to signal when set voltage is detected. Voltage can
be set to 4.8V or 6V and the LED will show Green or Red flashing or
steady to signal the receiver voltage status.
Features:
- Integrated CDI remote kill switch, allows pilot to kill engine anytime on the ground or in the air
- Fiber Optic coupled input/output to the CDI provide complete isolation between the receiver power and CDI power to prevent high-frequency interference
- UBEC feature allows direct connection to 2-3S lithium or A123 battery power supply
- Real-time two-color LED displays receiver supply voltage (voltage 4.8V/6V can be set), warning the pilot if a low receiver voltage condition is detected preventing possible loss of control
- The unique low-voltage alarm will trigger when voltage drops below 4.2V or 5V for 3 seconds or more. Red LED light will flash and keep flashing until the batteries are replaced or charged
Technical Parameters:
- CDI in: 6-13V
- CDI out: 5.2V/0-5A
- Weight: 15g
- Volume: 35mm(L) x 17mm(W) x 8mm(H)