Flyduino KISS 32-bit Flight Controller V1.03 Latest
Product Code: FKISS-32BFC103
Our Price: $56.00
Description
As we felt the need for a modern more simplified 32bit
Flight controller, we made the KISS FC, which includes a complete own
Flight Control Firmware development who get rid of some old ballast,
this took some time, but the result is very pleasing.
The Idea was to
simplify some things and due to intensive long term testings of some
pretty good Pilots we where able to optimize the code to a point where
you hopefully get your quad in the air quite quick.
Normally you just
need to choose your Air frame in the GUI and are able to fly (at least
with KISS ESC), otherwise you can download presets of well known Pilots
for given configurations and of course can tweak the PID yourself over
the GUI.
The software setup side is reduced as far we can, many
things are allready taken in to account for you, if you bring some solid
soldering skills you should be able to build your quad pretty quick.
A
new feature is also the in built telemetry, in combination with our
32bit ESC line its possible to show the live telemetry data via OSD on
your FPV live feed or in the KISS FC GUI
This way you get usefull informations like the Voltage of your battery, current consumption, ESC temperature and motor RPM.
Other FC firmware (eg. Cleanflight) can be ported for the use with the KISS FC.
Supported copter types:
- Tri
- Quad +/x
- Hexa +/x
Supported RX types:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- MultiPlex
- classic RX with single channel output
- STM32F303CCT6
- MPU6050
Weight: 4.6g
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Voltage: 2-6S
Normally you don't need to download any driver for the USB support.
Windows 7 8 and 10 care for this on their own after you connected the device.